Thank you Klaus,
Dennis KØEOO _____ From: FlexRadio Systems Europe [mailto:flexradio...@t-online.de] Sent: Sunday, July 14, 2013 10:53 AM To: Dennis Petrich Cc: <smartsdr-prev...@flexradio.com>; <dx4win@mailman.qth.net> Subject: Re: DX4WIN and Flex 6500 not connecting Hi Dennis, It is for sure on the agenda in Austin. 73 de Klaus, DK7XL Sent from my iPad On 14.07.2013, at 16:13, "Dennis Petrich" <radio...@frontiernet.net> wrote: Hello Klaus, Thank you for the screen shots, I connected as shown but DX4WIN would not connect to the 6500 and would time out.... I have no port problems, DX4WIN worked for years with the Flex 5000A and DDUtil... Im stumped as to whats going on and need someone from Flex and/or DX4WIN to take a quick look at why DX4WIN is not talking the lingo required for the 6500s CAT server interface.... Again, thank you Klaus! Would someone from Flex and/or DX4WIN look to see what the problem is? Thank you, Dennis KØEOO _____ From: Klaus Lohmann [mailto:flexradio...@t-online.de] Sent: Sunday, July 14, 2013 2:37 AM To: Dennis Petrich Subject: RE: DX4WIN and 6500? Hi Dennis, soon I will uninstall this version of CAT - hence here are the relevant settings I have tried. Have a nice Sunday, Klaus -- FlexRadio Systems Representative for EU "Tune in Excitement!" Klaus Lohmann SDR-Funktechnik GmbH Godeke-Michels-Weg 12 D-21762 Otterndorf GERMANY Tel.: (+49) 4751 900501 Fax.:(+49) 4751 998569 Cell Phone: 0173 9118080 kl...@flex-radio.com flexradio...@t-online.de i...@sdr-funktechnik.de www.flexradio.com "Dennis Petrich" <radio...@frontiernet.net> schrieb: Thanks Klaus, appreciate your help! Cheers, Dennis KØEOO <hr size=2 width="100%" align=center tabindex=-1> </hr From: FlexRadio Systems Europe [mailto:flexradio...@t-online.de] Sent: Saturday, July 13, 2013 10:43 AM To: Dennis Petrich Subject: Re: DX4WIN and 6500? Dennis, I will set up the PC tomorrow again ... Then I will take the pictures and send it to you via this channel. 73 de Klaus, DK7XL, Sent from my iPad On 13.07.2013, at 17:18, "Dennis Petrich" <radio...@frontiernet.net> wrote: Klaus, can you take a picture of how you have the Flex CAT panel setup for the MAIN and SERIAL PORT tabs and send to me? Thanks, Dennis KØEOO <hr size=2 width="100%" align=center tabindex=-1> </hr From: Klaus Lohmann [mailto:flexradio...@t-online.de] Sent: Saturday, July 13, 2013 2:00 AM To: Dennis Petrich Cc: 'Jim Reisert AD1C'; 'Steve Nance'; smartsdr-prev...@flexradio.com Subject: RE: DX4WIN and 6500? Hello Dennis, for sure we will have a look at CAT program soon. Have a nice WE. Klaus -- FlexRadio Systems Representative for EU "Tune in Excitement!" Klaus Lohmann SDR-Funktechnik GmbH Godeke-Michels-Weg 12 D-21762 Otterndorf GERMANY Tel.: (+49) 4751 900501 Fax.:(+49) 4751 998569 Cell Phone: 0173 9118080 kl...@flex-radio.com flexradio...@t-online.de i...@sdr-funktechnik.de www.flexradio.com "Dennis Petrich" <radio...@frontiernet.net> schrieb: Hello Klaus, Your preference selections are what I already had except I had COM5 selected. Still no joy; But now I get a DX4WIN error message saying the port cannot be connected to because it already exists.... Which it does, it shows in the device manager under Flex-radio virtual serial port (com5). Dennis KØEOO <hr size=2 width="100%" align=center tabindex=-1> </hr From: Klaus Lohmann [mailto:flexradio...@t-online.de] Sent: Friday, July 12, 2013 10:51 AM To: radio...@frontiernet.net Cc: Jim Reisert AD1C; Steve Nance; smartsdr-prev...@flexradio.com Subject: Re: DX4WIN and 6500? Dennis, these were my last settings I´ve used yesterday. I only changed the ports deliberately - other settings were found by default. Hope that helps. Klaus -- FlexRadio Systems Representative for EU "Tune in Excitement!" Klaus Lohmann SDR-Funktechnik GmbH Godeke-Michels-Weg 12 D-21762 Otterndorf GERMANY Tel.: (+49) 4751 900501 Fax.:(+49) 4751 998569 Cell Phone: 0173 9118080 kl...@flex-radio.com flexradio...@t-online.de i...@sdr-funktechnik.de www.flexradio.com <radio...@frontiernet.net> schrieb: > Thanks Klaus, > > What other information did you put in DX4WIN preferences? Like what radio name?, what baud rate? and so on.... > > > Dennis KØEOO > > > > ----- Original Message ----- > From: "Klaus Lohmann" <flexradio...@t-online.de> > To: "Dennis Petrich" <radio...@frontiernet.net> > Cc: "Jim Reisert AD1C" <jjreis...@alum.mit.edu>, "Steve Nance" <sna...@charter.net>, smartsdr-prev...@flexradio.com > Sent: Friday, July 12, 2013 6:56:00 AM > Subject: Re: DX4WIN and 6500? > > > > "Dennis Petrich" <radio...@frontiernet.net> schrieb: > > > > > I need help, > > > > Has anyone in the 6000 group been able to connect DX4WIN V8.05 to the 6700 or 6500? > > > > I tried connecting to the CAT port COM5 but NO joy.... > > > > Dennis KØEOO > > > > > > > Dennis, > > I could connect 6500 with my demo version of DX4WIN without problems. > In preferences I defined COM5. Then I erased COM5 in CAT and ceated COM10 - > with preferences set to COM10 again no issue. > > > Klaus > > -- > > FlexRadio Systems Representative for EU > "Tune in Excitement!" " > > Klaus Lohmann > SDR-Funktechnik GmbH > Godeke-Michels-Weg 12 > D-21762 Otterndorf > GERMANY > > Tel.: (+49) 4751 900501 <callto:04751900501> > Fax.:(+49) 4751 998569 <callto:04751998569> > Cell Phone: 0173 9118080 <callto:01739118080> > kl...@flex-radio.com > flexradio...@t-online.de > i...@sdr-funktechnik.de > www.flexradio.com > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html