I think this is an ICOM software (CI-V?) issue. DXlab does it to an IC756 also at the club station. I have never had it happen with my Kenwood. Seems to be a command that connects the ICOM radio to the software causes things to switch to the sub-VFO for a couple seconds and then back. With a SteppIR hooked up and the alternate VFO on a different freq/band, the controller starts changing the antenna and then reverses and changes back when main VFO comes back.
Dan KI6X -----Original Message----- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Marcel ON6UQ Sent: Wednesday, September 11, 2013 1:16 AM To: DX4WIN@mailman.qth.net Subject: [Dx4win] (no subject) Hello all, Hello all, Have recently installed a IC7600 and a connection established between the TRX and the laptop with XP via USB ports. Both DX4WIN as N1MM works ok . When I start DX4WIN , then flashes the VFO frequency readouts of both of VFO A and B . Does anyone have any idea what the reason of this is and what to do? In the DX4WIN window 'Freq (khz)' no readout, only a few seconds by pressing F9 and than disappear. Thanks in advance MarCEL ON6UQ ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html