Marcel I think you have downloaded a driver I made for the IC7600 >From Jim´s webpage that normally isn´t available anymore because of this behavior This version was with the possibility to switch between VFO´s for readout but doesn´t work Like it should be
Guy ON4AOI, Just back from NY+DC so will check what version is ok for you tmw after I get rid of the jetlag -----Oorspronkelijk bericht----- Van: [email protected] [mailto:[email protected]] Namens Marcel ON6UQ Verzonden: woensdag 11 september 2013 10:16 Aan: [email protected] Onderwerp: [Dx4win] (no subject) Hello all, Hello all, Have recently installed a IC7600 and a connection established between the TRX and the laptop with XP via USB ports. Both DX4WIN as N1MM works ok . When I start DX4WIN , then flashes the VFO frequency readouts of both of VFO A and B . Does anyone have any idea what the reason of this is and what to do? In the DX4WIN window 'Freq (khz)' no readout, only a few seconds by pressing F9 and than disappear. Thanks in advance MarCEL ON6UQ ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
