How big of a deal would it be for Paul to support the XMMT.ocx
interface?
I have no idea what is involved in a change to the RTTY interface
code in DX4Win. The interface is publicly documented in the MMTTY
"Programmers Info" and can be used freely. Developers of DXLab
Suite, Logger32, N1MM Logger and WriteLog have all either replaced
the traditional *.exe interface or supplemented it with the added
*.ocx interface for MMTTY and/or 2-Tone in the last year.
One benefit of including (or switching to) the *.ocx interface would
be the ability to replace the old PSKcore PSK31 support with MMVARI
which would instantly provide BPSK63/125 and MFSK as well as multi-
channel PSK/MFSK receive capability.
73,
... Joe, W4TV
On 10/10/2013 2:24 PM, Dave Perry, N4QS wrote:
Thanks Joe for your answer below. How big of a deal would it be for Paul to
support the XMMT.ocx interface?
With 2Tone I can decode S0 to S1 sigs. MMTTY needs S3 to S4 sigs to decode
accurately.
Dave, N4QS
-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Joe Subich, W4TV
Sent: Thursday, October 10, 2013 1:19 PM
To: [email protected]
Subject: Re: [Dx4win] Using 2Tone inside DX4WIN
2-Tone emulates the XMMT.ocx interface in MMTTY. DX4Win does not
use/support the XMMT.ocx interface so 2-Tone will not be usable with DX4Win.
73,
... Joe, W4TV
On 10/10/2013 2:08 PM, Dave Perry, N4QS wrote:
Lee,
I would also like to use 2Tone with DX4WIN. It already runs great
with N1MM. I have copied the 2Tone.exe file into the MMTTY directory
within DX4WIN as well as the 2Tone.ini file - but did not overwrite
the MMTTY.ini per the 2Tone installation instructions. I then tried
to replace the executable path within DX4WIN to the following:
C:\program files\MMTTY\2Tone.exe
The program tries to load within the MMTTY window of DX4WIN, but I get
an error message that 2Tone cannot run standalone and that it must run
with another logging program like N1MM. (The 2Tone documentation does
say that it can run with other logging programs.)
The installation instructions for 2Tone say to not modify the original
MMTTY.ini file and to leave it in the MMTTY directory because 2Tone
needs that file to run. So I am wondering why DX4WIN cannot run 2Tone
as a replacement to MMTTY like N1MM? I have also copied the XMMT.ocx
file and placed it in the DX4WIN directory.
Are there any other changes that need to be made within the DX4WIN
logging program for it to work with 2Tone? I tried emailing Paul with
DX4WIN and David with 2Tone, but neither one has responded so far.
Can anyone else provide any assistance? Thank you.
Dave, N4QS
-----Original Message-----
From: [email protected]
[mailto:[email protected]]
On Behalf Of KY7M
Sent: Wednesday, October 09, 2013 11:55 AM
To: [email protected]
Subject: [Dx4win] Using 2Tone inside DX4WIN
Is anyone using 2Tone in DX4WIN or is it even possible? I was ably to
work TT2TT for a new one on RTTY yesterday, but only after frantically
closing DX4WIN and opening N1MM where I have a 2Tone window installed.
It was remarkable to see the clarity of copy in 2Tone compared to
MMTTY on the very fluttery signal from Mayotte to the West Coast USA
at mid-day. I could not have made the QSO otherwise.
Lee, KY7M
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email
list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email
list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
