Why would you set the CW cutoff to 10100? It seems the opposite to me.
Mine is set to10500.
Garry, NI6T
On 10/16/2013 9:46 PM, Kostas SV1DPI wrote:
file>preferences>qso tab>cutoff frequency and set the freq cut off for
30m to 10.100. Please report if this correct your problem. I have
found one friend that this has not corrected the problem. I was so
sure that I made it myself via teamviewer but it didn't worked for
him. But it is the problem for many others.
73 Kostas, SV1DPI
Στις 17/10/2013 07:00, ο/η W9RPM έγραψε:
Roger, I have that happen in DX4WIN when I use a Pan Adapter, Na3P
and SDRIQ makes no difference with with it quite often. Played around
with the timing, but still get it often. 73 John W9RPM
On 10/16/2013 10:21 PM, Roger Huntley wrote:
Upon clicking on a 30 Mtr spot my program has suddenly started
showing the
contact as a SSB contact in background mode with no way of changing
it to a
CW QSO. Using a K3 with the proper mode showing on it.
Any ideas would be appreciated.
73,
Roger, W7VV
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
