I have found a way to interface/synchronize my SDR Console (for RX) and FT1000MP controlled by DX4WIN via microham Keyer/Router (for TX) . For this I am using virtual port pair creator VSPManager from K5FR and RigSync program from W2RF. The problem I am experiencing now is that it takes some delay between selecting frequency/mode on the SDR and having it refelected on the FT1000MP. To improve the situation I wish to reduce polling rates. Currrently in DX4WIN polling time is 500ms.
What could be a minimum polling rate that would not impair the DX4WIN/FT1000MP operation?? Also, FT1000MP CAT baud rate is set to 4800. How high could be increased to? 73, Radi F6GNZ ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
