I have selected Yaesu ft1000mpmkv and both default boxes checked. dtr
and rts boxes are also checked.
Have in mind that you need a straight cable and for com port properties
4800,8,n,2
73 Kostas SV1DPI
Στις 1/12/2013 9:40 μμ, ο/η Jim Reisert AD1C έγραψε:
Please respond to Georg directly, and copy the reflector. I'm sure
there are plenty of FT-1000MP users here that could help.
Thanks - Jim AD1C
---------- Forwarded message ----------
From: Georg Magnússon TF2LL <[email protected]>
Date: Mon, Nov 25, 2013 at 2:16 PM
Subject: TF2LL CAT problem
To: [email protected]
Hello Jim.
After long time I want to give DX4WIN one more change ! I was not
happy in the beginning so naw I want to try again. I have install
DX4WIN to may labtop using Flex 3000 and working OK. Then I try to use
with may FT-1000MP Mark-V I have a problem. I have configure in the
settings all I know about but Cat is not working. Only small blink on
the Cat light when I start radio. Small blink on the FT and the
Navigator. I can see when I start radio and Cat light blink the freq
change in the capture window.
What can I possible doing wrong, any ideas ?
73 de TF2LL
Georg.
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
