Thanks for all the help. All is working OK. I had made a dumb mistake when I forgot to disable all the I/O from the previous logger program. As you said " You can't share ports". 73 de Joe.
On Monday, December 2, 2013 2:01 PM, Jim Reisert AD1C <[email protected]> wrote: On Mon, Dec 2, 2013 at 9:32 AM, Joe Young <[email protected]> wrote: > I am trying to setup WinKey with DX4Win. The winkey works fine on the same > computer with another logging program. > It uses Com Port 5. In DX4Win CW setup I have Device type set to Winkey, In > software CW keying/ptt control > I have NONE 0 NONE NONE, External keyer port = com 5. Save changes and exit. > Exit DX4Win, Run DX4win again. > Note says "winkey" not responding. Using another logger with Winkey selected > (same computer, interfaces, etc.) and com5 all works fine. > I am missing something? Thanks, Joe. > (I did get the rotator to work OK, so there is some progress.) Hi Joe, First, WinKey can only be used by one program at a time -- COM ports can not be shared. Is it connected to a USB port on your computer, with a virtual COM port created by the USB driver, or do you have a real serial COM port between the computer and the WinKey? Your setup looks and sounds correct. I can't see my exact setup at home, but it's working fine for me. I'll try to remember to check my settings when I get home. - Jim -- Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us/ ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
