Hi Jim I have made a rigfile for the IC-7100 a few months ago You probably need only address change and corrected baud rate to work with the IC-7200
You find it on AD1C downloads Guy ON4AOI -----Oorspronkelijk bericht----- Van: [email protected] [mailto:[email protected]] Namens [email protected] Verzonden: maandag 27 januari 2014 5:11 Aan: [email protected] Onderwerp: [Dx4win] mkaking a ic 7200 work with dx4win hi all, i have ver 8.05 and need to add the ic-7200 to rig control and to use its onboard sound card for psk and ritty. the address is 76h and in hex that is 16.now i have used this with dxlab, but paul your program is sooooo much better. i have used it since the start. the usb port is port 6 19200, n,8,1.. command interval is 200 (ms),scan dwell is 1, continous interrogation , and no intergrogation while transmitting. works fine on dxlab. hope you guys can tell me how to hook it up to dx4win. thanks jim harper, du3/w4rs ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
