On Fri, Feb 7, 2014 at 4:44 PM, Robert Anthony <[email protected]> wrote:
> I am having trouble keeping my radio connected with dx4win. I am running it > with micro-ham interface III. I can connect, but then i get a message that > connection is closed. I just started using the micro-ham interface III with > the Idea of using digital modes and i was interested in doing some rtty > contests. I started using DM 780 for my rtty and psk31, but i also have to > have HRD connected to my radio in order to do that. Has anyone tried this > and if so have they gotten it to work. I have been using dx4win for about 13 > yrs and didn't have any trouble till i wanted to start running digital > modes. Bob, it would be helpful if you mentioned the radio model and settings (i.e. baud rate etc.) There is no "connection closed" message, I think it says "radio timed out" or something like that. I have never had any problems keeping either ICOM or Yaesu radios connected via the microHAM microKEYER (original) or microKEYER II. I assume the USB Keyer III (?) you are using has the same hardware for the radio interface. -- Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
