Interesting issue Purchased a Hygani DCU-2 Digital Control Box. It uses the DCU-1 protocol, 9600 baud,n,8,1 originqal assiugned to comport 7 changed to comport 15
DX4WIN v8.05 with Jims latest updates Set up per dx4win and HyGain instructions NADA Did some research and found a similar issue and reinstalled v8.05..worked great could turn the box on and off as needed and it did it's thing Ocassionally it would not like a callsigns direction and not turn Went back and updated to Jim's latest and greatest using his updater and lo and behold...would not work changed comports, restarted computer and progran..f11 would not activate box reinstalled v8.05 again, everything back to normal Any suggestions as to what is going on would be appreciated this is part of what i hope to be a ermote station for my use when I travel thanks Steve KF2TI LANDING, NJ ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
