Please reply to both Markku and the reflector.
---------- Forwarded message ---------- From: Markku Teppo <[email protected]> Date: Wed, Apr 16, 2014 at 8:11 AM Subject: Problems in using DX4WIN and MixW at the same time To: [email protected] Hi James! I have been used DX4WIN for many years with success. I had no problems with the CAT in DX4WIN when I had a direct cabel between the transceiver and DX4WIN. A couple of years ago I purchased Rig Expert Interface and MixW3 software for digimodes. Now I have problems with the CAT in using DX4WIN and MixW at the same time. According to the installing instructions both software should use the same virtual comport. Sometimes I could use the CAT in DX4WIN when I shut down MixW. If I had DX4WIN running, MixW could not use the comport at the same time. Now when I start DX4WIN it cannot recognize the CAT comport and there will be a message "Radio timed out, Radio interface has been disabled" although I don't have MixW software running I have a new computer with Windows 7 (64 bit) and the transceiver is FTdx5000. How could that kind of problem be fixed? It is somehow boring, because DX4WIN can't read the mode and frequency from the transceiver and I have to do it manually. Several times I have forgotten to do it and afterwards I have had to try to remember the right mode and band. Best 73 de Markku, OH8OR Ylivieska Finland [email protected] ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
