Dwayne, That makes it very easy. In the log entry window, under the LoTW menu, select Export to LoTW. This will open a window for you to name and save the file. Make sure you know where you put it. You may chose to clear the upload flags or not. The file you saved is an ADIF file, that TQSL can handle directly.
A couple hints - you must have the LoTW flag set in order for QSOs to show up in the ADIF file. You can use filters to select whichever QSOs you want and then set the LoTW flag in the same menu selection. Once you generate the ADIF file - if you screw something up and want to create a new ADIF file - you must clear the upload date and reset the upload flag (both in the same menu) before it will let you re-make the ADIF file. Good luck. 73, Bud N7CW On Thu, Sep 18, 2014 at 4:07 PM, Dwayne <[email protected]> wrote: > Tnx for the reply Bud.. > I'am useing ver.. 8.04 in the main p/c and ver 8.05 in the lap top. 8.04 > is the one I would use to send my logs in to LOTW... > Tnx > Dwayne > > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
