4. When selecting a DX SPOT that has a split it SETS the SPLIT A B
not freq changes.
> 4. THE FREQ DOES NOTHING no changes.
>
> So MODE is set, SPLIT mode is set, BUT no freq changes.
Sorry, I don't understand this and since I do not have an FT-991 I'm
blind as to the behavior.
73,
... Joe, W4TV
On 2015-03-30 8:49 AM, bob wrote:
Hi Joe,
Well progress.
1. I changed the radio and dx4win options as advised.
2. I turned off the radio and started DX4win and then started the radio.
3. I can click on DX SPOTS and the MODE is set.
4. When selecting a DX SPOT that has a split it SETS the SPLIT A B not
freq changes.
4. THE FREQ DOES NOTHING no changes.
So MODE is set, SPLIT mode is set, BUT no freq changes.
Cool.....were getting somewhere.
I patiently wait your next instructions.
Bob
On 3/29/2015 9:43 AM, Joe Subich, W4TV wrote:
If you man no data at all from the rig, make sure that you
have checked RTS High in the Radio Setup (DX4Win Preferences)
and selected (RTS High) and set CAT TOT (menu 032) and 232C
TOT (menu 30) to 1000 depending on whether you are using USB
or RS-232 for control. The default data rate for the FTdx3000
rig file is 38,400 bps - the rig default rate is 4800. You will
need to reset menu 029 (232C Rate) or menu 031 (CAT rate) to
38,400 depending on whether you are using USB or RS-232.
If you are using USB, you will need to install the Yaesu USB
driver and the rig will need to be turned of *before* starting
DX4Win.
73,
... Joe, W4TV
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
