I recently upgraded my Icom 756 Pro III for a new Icom 7600. I use a Rigblaster Advantage for interface and nearly everything works fine. However, when I double click on a spot on either the packet window or the band map, the mode changes as needed on the radio, but the frequency usually does not. Repeated double clicking sometimes works after a while. Generally, It will briefly show the spotted band in the band window, but then defaults in a few seconds to whatever frequency is on the VFO at the time. However, if a QSX frequency is shown in the packet window, it readily puts that frequency in the main VFO. I have tried both the 250HZ and 500HZ versions of the radio control (ON4AOI - 01/02/2011) with no difference (why do they even exist). When in logging mode, the radio frequency is shown OK in the logging screen, although it changes rather slowly. I'm using version 8.05. The spotting interface works fine in band maps for N1MM and Writelog. 73, Dick, W2YE ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
