I upgraded my shack computer to Windows 10 recently without any issues. You said you are using IE10, but that may be a typo. I opted to use the new Windows 10 browser, Microsoft Edge as my default browser. It's working fine. All amateur radio software with CAT following is operating as before. Open Control Panel and navigate to Network and Sharing Center. Confirm that you are connected to your ISP provider via your home network ID and Wifi security key. Then confirm that it is listed as a Private Network. Windows 10 asked me to set up a "Homegroup ". Search for that menu, set it up, and write it down for future reference. Then confirm that you are or can connect to your original home network. Hope this begins to cure your issue. 73, Ken, NE6AA
-------- Original message -------- From: Don Prater <[email protected]> Date: 08/19/2015 10:31 (GMT-08:00) To: [email protected] Subject: [Dx4win] Windows 10 and DX4WIN Upgraded to IE10 and now I cannot connect to my own node via my local area network. I was able to connect to the node computer via its local address(192.160.0.6). That no longer works. Has anyone had the same problem and might have an answer? Don W4TO ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
