OK thanks to N4PY it is all working.
DX4WIN logging program running.
N4PY Pegasus rig control program running.
FLdigi running.
A little manipulation of each program and it all works together.
OH..let me mention the VSP program provided by K5FR is needed to
allow communication from Pegasus pgm to Fldigi.
I learned alot these past few days. And thanks to all you guys who gave
me input
that helped my mind look at this in different ways.
Bob
On 9/7/2015 7:10 AM, Bob [email protected] [win-fldigi] wrote:
I too was in the business ATT retired data communication tech...serial
ports were easy
break out box could tell you anything you needed to know WHY it wasn't
working.
Break out box on a port use jumpers to test voltages..use jumper make
a pin high.
Yup....wish we still had them. 8 port comm boards they worked...oh
well i digress..
This is what I'm working on and I'm close to giving up.
DX4WIN is my logging pgm no rig file FT-991 support.
N4PY Pegasus rig control very nice allows complete RIG control within
DX4win
just now playing using it.
FLdigi for digital...N4PY is helping me run it the same time as
DX4WIN, N4PY pgm
and fldigi all in the desktop window.
WHY???? Because I just don't want to start all over with another
LOGGING PROGRAM I have used DX4WIN for 20 years I know everything it
does imports exports preferences blah blah.
But I'm this close to leaving for a current supported logging program.
USB geeeeeessss....
Anyway thanks for the replies guys.
Bob
Sent from my iPad
On Sep 6, 2015, at 9:05 PM, VK6HSB [email protected]
<mailto:[email protected]> [Yaesu-FT-991-group]
<Yaesu-FT-991-group@0 years.com <http://years.com>> wrote:
Hi Bob
This took me quite a while to work out too, and I did serial comms for a
living. I kept going back to the names of the ports as a guide to what
they do, and ended up confused.
It will not work, because the 'standard' com port does not have a serial
data connection. It only connects to the RTS and DTR lines.
It would have been much less confusing if the first port was called
'standard' and the other was called a 'control' port.
It's a bit deceptive to call the second port 'standard' at all, because
it isn't. The 'enhanced' port is much more 'standard' than the standard
port, if you get what I mean :-)
Steve VK6HSB/portable/3
On 7/09/2015 3:56 am, bob [email protected]
<mailto:[email protected]> [Yaesu-FT-991-group] wrote:
>
>
> I guess I'll need someone to confirm standard com port will or will
not work
> with FLDIGI and FT-991 because I have tried all options.
>
> I agree though you would think it should work with the description of
> the functions
> at the Yaesu web page.
>
> Bob
>
>
> On 9/6/2015 1:40 PM, [email protected]
<mailto:[email protected]> [Yaesu-FT-991-group] wrote:
>>
>>
>> The enhanced port is used for CAT, such as frequendy readout or
>> change, filter selection etc. The standard port is not capable of
>> that. It passes fsk shift commands, PTT commands, and cw keying
>> commands. These are by rts and dtr selection.
>> Maybe this helps. You can try changing from rts to dtr or vice versa
>> to affect ptt, cw, or fsk. Also, for both n1mm and hrd, i had to set
>> rts to disable in the 991 menu to get fsk to work.
>> Hope this helps.
>> Carl K0YCR
>>
>
>
>
> ----------------------------------------------------------
> Avast logo <https://www.avast.com/antivirus>
>
> This email has been checked for viruses by Avast antivirus software.
> www.avast.com <http://www.avast.com> <https://www.avast.com/antivirus>
>
>
>
--
VK6HSB/mobile/VK5
__._,_.___
------------------------------------------------------------------------
Posted by: Bob <[email protected]>
------------------------------------------------------------------------
Reply via web post
<https://groups.yahoo.com/neo/groups/win-fldigi/conversations/messages/13289;_ylc=X3oDMTJyM3RsdGhzBF9TAzk3MzU5NzE0BGdycElkAzIyODIzNDc1BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAMxMzI4OQRzZWMDZnRyBHNsawNycGx5BHN0aW1lAzE0NDE2MjQyMzE-?act=reply&messageNum=13289>
• Reply to sender
<mailto:[email protected]?subject=Re%3A%20%5BYaesu-FT-991-group%5D%20Re%3A%20%5Bwin-fldigi%5D%20Com%20ports>
• Reply to group
<mailto:[email protected]?subject=Re%3A%20%5BYaesu-FT-991-group%5D%20Re%3A%20%5Bwin-fldigi%5D%20Com%20ports>
• Start a New Topic
<https://groups.yahoo.com/neo/groups/win-fldigi/conversations/newtopic;_ylc=X3oDMTJmZWRlMjJyBF9TAzk3MzU5NzE0BGdycElkAzIyODIzNDc1BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNudHBjBHN0aW1lAzE0NDE2MjQyMzE->
• Messages in this topic
<https://groups.yahoo.com/neo/groups/win-fldigi/conversations/topics/13289;_ylc=X3oDMTM3czY1aWZhBF9TAzk3MzU5NzE0BGdycElkAzIyODIzNDc1BGdycHNwSWQDMTcwNTA2MzEwOARtc2dJZAMxMzI4OQRzZWMDZnRyBHNsawN2dHBjBHN0aW1lAzE0NDE2MjQyMzEEdHBjSWQDMTMyODk->
(1)
Visit Your Group
<https://groups.yahoo.com/neo/groups/win-fldigi/info;_ylc=X3oDMTJmdTJtcWk2BF9TAzk3MzU5NzE0BGdycElkAzIyODIzNDc1BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzE0NDE2MjQyMzE->
* New Members
<https://groups.yahoo.com/neo/groups/win-fldigi/members/all;_ylc=X3oDMTJnMDFvc25jBF9TAzk3MzU5NzE0BGdycElkAzIyODIzNDc1BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxNDQxNjI0MjMx>
24
Yahoo! Groups
<https://groups.yahoo.com/neo;_ylc=X3oDMTJlbDE4Y2M0BF9TAzk3NDc2NTkwBGdycElkAzIyODIzNDc1BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNnZnAEc3RpbWUDMTQ0MTYyNDIzMQ-->
• Privacy
<https://info.yahoo.com/privacy/us/yahoo/groups/details.html> •
Unsubscribe
<mailto:[email protected]?subject=Unsubscribe> •
Terms of Use <https://info.yahoo.com/legal/us/yahoo/utos/terms/>
.
__,_._,___
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
