When I click on a spot in the band map my radio jumps to the correct spot frequency but not the correct mode, in some cases....
DX4WIN V8.05 shows the correct mode (mode selected in the radio when there connected) but if I click on an RTTY spot the radio will go to the correct frequency but may change modes to CW or DIGL or SSB? I’m running the Flex 6500 and using the “Flexradio” RADIO profile and everything but the digital mode selection is working... Should I have a MODE data column displayed in my DX SPOTS window for this to work properly? If so I could not find where to add mode information to the display? One solution would be if I clock on a spot and only the frequency goes to the radio and not the mode. Is this possible? I searched through the help files for several hours and cannot find an answer... DX4WIN is a very sophisticated program with enormous flexibility so I hope there is an easy solution I missed. Would appreciate any help from the members.... Regards, Dennis, k0eoo ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
