Problem finally solved.
These are the steps I went through:
1. Tried HRD6 no go.
2. Bought the USB cable to the 950 no go.
Note: The part I forgot to mention is the laptop has
two partions. One is win 7 home 64 bit and win
7 pro 32 bit. I was moving all my ham stuff to
to the win 7 home partion.
3. Tried loading a new copy of dx4win to win 7 pro partion.
4. It communicated with the 950. The HRD worked also.
Moral of the story: Neither product works on win 7, 64 bit.
-----Original Message-----
From: DX4WIN [mailto:[email protected]] On Behalf Of w1ioo
Sent: Thursday, November 19, 2015 7:13 PM
To: [email protected]
Subject: [Dx4win] dx4win connecting to Kenwood ts950sdx.
Hi all
I am trying connect my laptop to my Kenwood Ts 950sdx. This worked a year
ago. I know I played around for quite awhile. I have a Kenwood IF 232c
connected between the computer and the TS-950sdx. The cabling goes from a
usb cable with a male serial connector to a female serial connector. The
next plug is a parallel connector to the back of the IF 232c box. The
special connector cable goes to the rig. HRD v5 does not work either. It did
a year ago.
Any help would be great.
Wally W1IOO
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7227 / Virus Database: 4460/11029 - Release Date: 11/19/15
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
