Congratulations! I knew you could get it working. ---------- Forwarded message ---------- From: f6gnz <[email protected]> Date: Wed, Feb 24, 2016 at 3:25 PM Subject: [ARUser] Re: CC User shared by logger and CW Skimmer To: [email protected]
Hi Lee and all, I installed CC User and updated to the v.3.0241 after some small problems (during v3 update download and "Continue" the message to close app was hidden, resulting in error message "Permission denied". Closing CC User and resuming, upgrade went OK). After configuring User, Bands and two Telnet Connections, one to ve7cc-1 and another to my local CW skimmer port 7301 (edited CC User cluster list and added my Skimmer localhost port 7301), in the CC User window I started receiving spots both from ve7cc-1 and from my local CW Skimmer. To link spots to my logging program DX4WIN, in CC User clicked on Config-Ports/Logging Program and in Ports setup under Logging Program Connection checked "enable Telnet" and use port 7300. In DX4WIN I selected as Cluster " Local>CC User:7300", and: ALL WORKS UFB AS DESIRED! I am getting remote and skimmer spots in my logger's BandMap, by clicking on them I setup my radio band/frequency/mode, populate logging window with selected callsign, and Skimmer starts skimming the new band frequencies! " I'm haaaaapy again..." Lee, thanks a lot for your fine application! I will use the last item in the CC User Menu.. Best 73, Radi F6GNZ ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
