I also use 5160/8160 labels. In the PRINT QSL window there is an entry for MISSING LABELS. So if you have already printed and used some labels on that sheet place that number in the MISSING LABELS box. If you have a sheet of 30 labels and you have previously printed and used 8 of them just put the number 8 in that box and the printer will skip ahead and start at label number 9. I do that all the time and it works great. I use a HP Officejet Pro but the printer does not matter as long as it will print sheets of labels.
GL, Alan, K7ACZ -----Original Message----- From: DX4WIN [mailto:[email protected]] On Behalf Of Jay Chamberlain Sent: Tuesday, February 2, 2016 5:40 AM To: [email protected] Subject: [Dx4win] Print to File? Trying to print my QSL labels to file instead of the printer. Now where in Help did I find where the file is saved. I use 5160 style by the sheet and unless I am printing a full sheet (30 labels) there is always a lot of waste. My thought would be to have the QSL data in file so I can manipulate the labels in Word so I can use partial sheets when I am only printing a few labels. I am getting ready to buy a Canon all-in-one LazerJet so the next step will be to experiment with printing directly to the card. NS4Jay ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
