Not exactly sure what you are trying to accomplish but, if all you want
to see are CW QSOs then you need to change the "All Modes" setting to
"CW". Otherwise, you should be good to go.
Mike / W8DN
On 12/13/2016 2:51 PM, OZ0J Joe wrote:
Hi
I earlier got the information that CW QSOs before 1 January 1975 do not
count for DXCC. Since that I have tried to help my friend OZ1LO to find out,
whatever there is an error in the DXCC report in DX4WIN version 8.05.
I have created a log with 2 QSOs on 80 M. Both QSOs are with CW mode and one
QSO is BEFORE 1 January 1975 and one AFTER.
When I run the DXCC report (Report -> DXCC) I get this result:
MIXED 2
CW 1
80 M 2
Even when I run the DXCC report with these settings:
DXCC summary or listing
Mode = CW
Band = 80M
I still get:
MIXED 2
CW 1
80 M 2
Why do I not only get the CW DXCC awarded QSOs here?
Pictures of the report settings and result can be found at
https://dl.dropboxusercontent.com/u/2651703/dx4win-oz1lo.pdf
How do I (or OZ1LO) get a report that ONLY show the valid CW DXCCs on each
bands? Or is that not possible?
73 Joe, OZ0J
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html