NE6AA here. I have a question on my DX4WIN v8.0.5 Preferences, in particular under File, Preferences, and Radio Settings for Second Radio (IC-775DSP). "First Radio" is FT-2000D with good CAT control via COM 3; "Second Radio" is IC-775DSP with good CAT control in Fldigi and HRD apps on COM 5, but no CAT control in DX4WIN .
IC-775 will not follow CAT control from USB-Serial connection on COM 5. DX4WIN hangs up and displays "Radio timed out. Radio interface has been disabled" I am able to enter QSO data in Non-Real Time mode, but there is no CAT following. Need help to adjust my settings for the 775 as shown on this screen shot. I have swapped First and Second Radio in File, Preferences, Radio settings with no success on the IC-775. I have tried a check-mark in "RTS High" on Second Radio without success. I believe the Address and Baud Rate settings are correct. DX4WIN is not taking my Second Radio setting for CAT control. Thanks in advance for your inputs! 73, Ken, NE6AA 760-536-3123 main 951-515-6960 mobile [email protected]<mailto:[email protected]> ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
