I don't own a 775 (even I would like to have one hi hi). Please see the
manual page 48.
I think it is menu 15,16,17,18. Put the in default except baud rate (it
is by default auto, put it in 1200). Please see also if in menu 15
address is 46H.
...73 de Kostas SV1DPI
(One of SZ1A-EP6T)
On 22/1/2017 1:37 πμ, Kenneth Leon wrote:
ADDENDUM from NE6AA (I was unable to upload a screen shot of the DX4WIN Radio
Settings due to message size limitation):
DX4WIN v8.05
BEGIN DIALOG BOX
"File, Preferences, Radio tab:
Radio One Settings (These settings work for CAT control)
Type: Yaesu FT2000; Address: 00; Baud Rate: 4800
Notes for radio: None
Com Port: COM3; Poll rate (MS): 5000; Max tries: 6; DTR High: Checked
Transverter Offset (KHz): 0; RTS High: Unchecked; Band: All bands
Radio Two Settings: (These settings DO NOT WORK for CAT control)
Type: ICOM 775; Address: 46; Baud Rate: 1200
Notes for radio: Also 756; selects narrow filters
Com Port: COM5; Poll Rate (ms): 5000; Max tries: 6 DTR High: Checked
Transverter Offset (KHz): 0; RTS High: Unchecked; Band: All bands"
END DIALOG BOX
Will greatly appreciate a Fix for the IC-775DSP rig settings to gain CAT
control in DX4WIN v 8.05.
73,
Ken, NE6AA
760-536-3123 main
951-515-6960 mobile
[email protected]<mailto:[email protected]>
From: Kenneth Leon [mailto:[email protected]]
Sent: Saturday, January 21, 2017 9:55 AM
To: [email protected]
Cc: Kenneth Leon
Subject: FW: DX4WIN v8.0.5 Radio Preferences Settings
NE6AA here. I have a question on my DX4WIN v8.0.5 Preferences, in particular under File,
Preferences, and Radio Settings for Second Radio (IC-775DSP). "First Radio" is FT-2000D
with good CAT control via COM 3; "Second Radio" is IC-775DSP with good CAT control in
Fldigi and HRD apps on COM 5, but no CAT control in DX4WIN .
IC-775 will not follow CAT control from USB-Serial connection on COM 5. DX4WIN hangs up
and displays "Radio timed out. Radio interface has been disabled" I am able to
enter QSO data in Non-Real Time mode, but there is no CAT following.
Need help to adjust my settings for the 775 as shown on this screen shot. I
have swapped First and Second Radio in File, Preferences, Radio settings with
no success on the IC-775.
I have tried a check-mark in "RTS High" on Second Radio without success. I
believe the Address and Baud Rate settings are correct.
DX4WIN is not taking my Second Radio setting for CAT control. Thanks in advance
for your inputs!
73,
Ken, NE6AA
760-536-3123 main
951-515-6960 mobile
[email protected]<mailto:[email protected]>
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
