Enrique,
1) Attachments do not make it thru on this reflector.
2) DX4Win is not set up to accept anything except 3 numbers in the RST
fields. If you want to record the actual signal strength, you will need
to enter it into the comments section. You 'may' be able to edit the ADI
file so the signal strength goes to comments automatically but I am not
sure.
Mike / W8DN
DX4Win Since Version 0.97
On 1/22/2017 10:55 AM, Enrique Rabczuk wrote:
Hello,
I need help My DX4Win is versión 8.05.
I already imported a JT65-HF Log file from DX4Win. The problem is the values
it shows, 599. It should show values of -01 db or -06 db …..-015. Etc.
Please see a picture attached.
73
Enrique, CP6UA
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
