I've had the same problem with my IC-7600. While the mode changes OK, it only will move the radio if there is a QSX frequency posted, and it goes there fine. Must be a problem with the parameter file. 73, Dick, W2YE In a message dated 4/12/2017 8:30:58 P.M. Eastern Daylight Time, w...@bellsouth.net writes:
I am not able to get the DX4WIN program to transfer the spot frequency to my Icom 7600. I changed from a windows XP computer that was working fine but the frequency that is displayed on the Icom 7600 always shows up in the program's frequency window. I turned the CIV Translate off to no avail. Any suggestions are appreciated. Thanks, Steve - WA4B ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html