Also I find it tedious having to press F9 every time I start DX4WIN so that (1) DX4WIN reads my radio frequency and (2) the radio frequency gets communicated to the ATU in my Expert amp so I am ready to either receive or transmit and (3) DX4WIN is ready to log my first QSO. Could that not happen automatically or would that present a problem for some reason? I have mentioned this before but now might be an opportunity to do something about this? Certainly this problem does not exist with the contest logging programs like N1MM.
Regards Ian G3RVM -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim Reisert AD1C Sent: 16 August 2017 18:21 To: Bill Cc: DX4WIN Reflector Subject: Re: [Dx4win] DX4WIN Digest, Vol 160, Issue 6 On Wed, Aug 16, 2017 at 9:58 AM, Bill K5ZQ wrote: > I have another issue I hope is resolved in the new release. When no > radio is present or the radio is turned off while to program is > running it freezes DX4WIN until the radio times out. 1. Exit Add Real Time mode (ESC) before turning off the radio, or... 2. Use Add Off-line from the QSO menu item if you want to keep the logging window "open". -- Jim Reisert AD1C, <[email protected]>, http://www.ad1c.us ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
