Probably you need to define ptt also. I would suggest under
file>preferences> cw tab to put in RTS box your com ptt (com5).
Either you could press alt+s when you are in psk and define on tx tab
your ptt
...73 de Kostas SV1DPI
(One of SZ1A-EP6T)
Στις 2/11/2017 1:38 πμ, ο William Liporace έγραψε:
I thought it was my Navigator that was having issues.. It is more than
likely a configuration issues. I have installed the 9.02 version already
tonight...
So I am using the US/Timewave Navigator (same device).
Com 4 - CAT control
Com 5 - PTT
Com 6 - WinKey
Com 7 - PSK
Com 8 - RS-232 comport on the Navigator
In DX4Win
Radio tab
Only one radio - FTdx5000 - no issues
Control tab
Rotor - Green Heron - Com 3
PSK Sound Card
Input/output - Navigator RX/TX
CW Tab
Device - Winkey
External Keyer - Com 6
Cw/PTT - none
RTTY tab
Type - none
MMTTY - Path set to C:\Ham\MMTTY\MMTTY.EXE
It appears that I can't ge-+t PSK to work. There is NO function keys.
RTTY works via MMTTY
CW is working
For PSK and the FTdx5000, the radio needs to be in Packet Mode. I can hear
the tones from monitor, but I don't see any RF going out.
Any ideas or suggestions??
TNX Will WC2L
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
Message delivered to [email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
Message delivered to [email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
