Thank you, Dusty. That was the cause.
73, Mark -----Original Message----- From: Dusty Chapman [mailto:[email protected]] Sent: 5 November, 2017 7:36 AM To: 'Mark Weiss' Subject: RE: [Dx4win] Rotator issue Hi Mark, I had the same problem with my Orion controller. Simple fix for me was - Click on Rotator - Parameters - go to each band and click it and change the "disabled" to "Normal". I think I had to click the OK for each band as I went through the process. Good Luck 73, Dusty - K3WC -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark Weiss via DX4WIN Sent: Sunday, November 5, 2017 9:55 AM To: [email protected] Subject: [Dx4win] Rotator issue DX4WIN Ver. 9 does not control my Yaesu rotator (with Idiom Press RS-232 board). Version 8 controlled the rotator properly. Another rotator control program (PstRotatorAz) continues to control the rotator. That is when DX4WIN is shut down to free the COM port. Apparently DX4WIN seizes the COM port. The DX4WIN Ver. 9 rotator settings in Preferences-Control are the same as when I used DX4WIN Ver. 8. >From the above analysis, my guess is that the computer, COM port interface & the rotator are all functioning correctly. Has anyone else experienced this issue? Any suggestions for a fix? Tnx & 73, Mark, K6FG ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] Message delivered to [email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html --- This email has been checked for viruses by AVG. http://www.avg.com ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] Message delivered to [email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
