Hello Chris, Go to File > Preferences > Packet2 and make sure you have Cluster node auto connect enabled, your callsign and a Node address entered.
-- 73, Mike Cizek WØVTT -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Chris Sauvageot Sent: Tuesday, November 07, 2017 03:15 To: [email protected] Subject: [Dx4win] "Check for Updates" and cluster restart After "Check for Updates" function dx4win close and do a restart - but cluster starts not automatically again ( like at normal dx4win start) 73 Chris DL5NAM ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] Message delivered to [email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] Message delivered to [email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
