On Thu, Jan 18, 2018 at 6:50 AM, Jim Reisert AD1C wrote: > On Thu, Jan 4, 2018 at 11:07 AM, Larry Burke K5RK wrote: > >> I'm using DX4WIN with an Icom IC-7851. The CAT controls work well however >> DX4WIN does not seem to recognize when the rig is set to the DATA mode >> (e.g., USB-D1). DX4WIN just sees the rig as being in the SSB mode. Is there >> a way to have DX4WIN recognize when the rig is in the DATA mode? > > While there is a "DATA" mode that can be logged in DX4WIN, aren't you > really operating PSK, WSJT or some other "data" mode in these cases? > Which mode should DX4WIN pick? > > Contact me off-line. Assuming that IC-7851 and IC-7610 have the same > mode encodings, I can send you a modified .RIG file that will report > "DATA" mode.
Larry, looking at the command set, I do not think this can be done easily. The DATA mode(s) are in a different byte of the command response than the main modes (CW, SSB etc.). Maybe Guy ON4AOI will have an idea. -- Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
