Hello Byron, DX4WIN does not (yet) fully integrate with WSJT-X or JT Alert. The two most common methods for entering the new digi modes appear to be:
1. Log everything in WSJT-X and import the ADIF file into DX4WIN. This is probably best if you make a lot of FT8 (or other JT mode) QSOs. 2. Log them manually in DX4WIN just like you do with CW or SSB, but select Radio > Ignore Mode in real-time do you can select whichever mode you are using. This is what I do and it works fine for smaller numbers of QSOs. -- 73, Mike Cizek WØVTT -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Byron Peebles Sent: Tuesday, March 06, 2018 10:09 To: [email protected] Subject: [Dx4win] DX4WIN and FT-8 Is there a way to integrate the FT-8 WSJT-X app into DX4WIN like MMTY is done? I have recently started using FT-8 and I do import the QSOs, but would like it to work more like SSB and CW. 73, Byron ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] Message delivered to [email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] Message delivered to [email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
