Paul, Thank you so much! That's exactly what it was, no country.dat file in the \save folder. Copied one over from \backup and I'm good to go. And if it happens again, I now know what to do.
73, Joe KQ3F -----Original Message----- From: Paul Van Der Eijk [mailto:[email protected]] Sent: Saturday, July 21, 2018 12:53 PM To: Joe Stepansky Cc: [email protected] Subject: Re: [Dx4win] Error message Close the program and check that the file save\country.dat is present. I have seen multiple reports of this file disappearing. I speculate that this is due to an overzealous virus checker. You likely have a backup copy in the backup sub-directory. Also check if you use a secondary backup that is on a network drive or USB stick. These connections often go away and come back again. —Paul Sent from my iPhone > On Jul 21, 2018, at 11:10 AM, Joe Stepansky <[email protected]> wrote: > > One interesting thing is that after pressing F9 the date field is blank, the > time is 00:00 (which it isn't right now), the county field shows > Fqso_cntyStrIx, Custom Award shows Fqso_award and Custom award value shows > Fqso_award_value. Zone is 0. Not sure if that helps. > > 73, Joe KQ3F > > -----Original Message----- > From: Joe Stepansky [mailto:[email protected]] > Sent: Saturday, July 21, 2018 11:08 AM > To: 'Steve K7AWB'; '[email protected]' > Subject: RE: [Dx4win] Error message > > I started receiving the same error message this morning. Hadn't seen anything > like it before. My version is 9.0.4.1176. Doesn't seem to want to read ANY of > my log files. > > Anyone have an idea? > > 73, Joe KQ3F > > -----Original Message----- > From: [email protected] [mailto:[email protected]] > On Behalf Of Steve K7AWB > Sent: Tuesday, July 17, 2018 3:51 PM > To: [email protected] > Subject: [Dx4win] Error message > > The following error message comes up too often and then disappears. I have > the latest update as of July 17. And version 9.0.4.2176. > > Today it came up when I entered qso info from a recently received QSL card. > As I picked up the phone to compose this message, the error message > disappeared by itself. > > “an error occurred in the application. Choose either continue application, > restart application, or close application. “ > > And it happened again when I entered information from another qsl card and I > noticed the countdown clock at the top which says modified. when it hit > modified with zero time, the error message came up and it still staying on > the screen now for about 20 seconds and then disappeared > > What is going on here? > > Steve k7awb > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > Message delivered to [email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > Message delivered to [email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] Message delivered to [email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
