Have a look at the first line in the adi file with a text editor, you may find it is blank. If so remove the blank line. Then it will process normally.
John ZL1BYZ. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Carol Richards Sent: Wednesday, 25 July 2018 10:38 a.m. To: [email protected] Subject: [Dx4win] Importing FT8 to DX4WIN Hello all, Thanks for all of the responses. For some reason, DX4WIN didn't like my WSJT_X adi file because it kept hanging with the message, " Reading WSJT_log.adi (not responding)". I worked around the problem by importing the file to N1MM and then to DX4WIN. Not the most ideal way, but I will have to look into the problem a bit more closely. I have never had this problem before...strange. Carol ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] Message delivered to [email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] Message delivered to [email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
