Hello again, I have the following problems: When I click on a spot either on the band plan or in the spot window. The callsign turns up in the Callsign field in the loging window. The frequency and the mode changes but the frequency goes back to the initial, i.e. the one on the radio had at start while the mode changes to the one the station I was clicking on had.
Eg. if the radio is on 14040 and cw and I click on SM0XX on 14253 DX4WIN add SM0XX and SSB in respective field, the program also changes the frequency to 14253 but after 2-3 seconds it changes back to 14040. When it jump back the Follow radio box is ticked on the band map. The mode remains on SSB. If I turn the VFO dial on the rig the frequency changes accordingly in DX4WIN and remains on the frequency set. The same goes for changing mode on the rig, DX4WIN follows. I can run my TS-590 over an USB A-B connection. I have it set up as second radio and can start it within the program. So my question is , why is not the frequency added in DX4WIN. What setting have I missed? Here are my settings. Using Windows 7 Professional I use the Silicon Labs CP210x USB to UART bridge I have the com port set to: Bits per second: 9600 Parity: None Stop bits: 1 Row control: None It is Windos 7 Professional I use The radio settings in DX4WIN are ICOM 7600 _K2DBK, i.e. ON4AOI except the filter. Address: 7A Baud Rate: 9600 COM port: COM6 Poll rate (ms): 1000 Max tries: 6 DTR high and RTS high marked I connect the the computer and the rig via an USB A and B cable The settings in the radio are: CI-V baud rate: 9600 CI-V Address: 7Ah CI-V Tranceive: OFF CI-V OutPut (for ANT): OFF USB Serial Function: CI-V 73 de Mel - SM0MPV 8S0C - Contest Call ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] Message delivered to [email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
