Hello Will, Can't help you with RTTY, but yes, you can do CW keying via the USB cable.
File > Preferences > Radio uncheck DTR High and RTS high File > Preferences > CW set Interface to the same port you are using for the radio and DTR Line to CW Keying. That should do it. Of course, on the K3s config menu, you must have RS232 speed set to USB. -- 73, Mike Cizek WØVTT -----Original Message----- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of William Liporace Sent: Wednesday, October 03, 2018 19:34 To: Dx4win@Mailman. Qth. Net Subject: [Dx4win] K3S setup I could use some help with DX4Win and the K3S. I may have had most things working, but I have had a few questions... Can I use the MORTTY with MMTY, DX4Win and the K3S? Better options? how do I want to setup the radio to KEY CW via USA (communications)? Any other tips/tricks to setting up the K3S in DX4Win? TNX Will WC2L ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to mgci...@gmail.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html