I don't know if that's possible. Apparently there is a version of Windows 10 for the RPI, but it's not exactly full Windows, it's a version specifically for IOT. Here's a link to an article that I found: https://www.tomshardware.com/news/windows-10-raspberry-pi-hands-on,38629.htm l
More importantly, unless Paul decides to compile DX4WIN so that it will on the ARM processor, it wouldn't run even if Windows does. (The Windows for IOT build was built by Microsoft specifically for the RPI and is compiled for the ARM processor). I would think that this also applies to trying to use an emulator like WINE, though it's an interesting concept. -----Original Message----- From: [email protected] <[email protected]> On Behalf Of OZ0J Joe Sent: Friday, March 15, 2019 3:50 PM To: [email protected] Subject: [Dx4win] DX4WIN on Rastberry Pi 3 Hi Have anyone tried to install Windows 10 on a Rastberry Pi 3 and then install and run DX4WIN? I mostly use DX4WIN to get new bands or modes from the DX cluster. It could be nice to have that part on a Rastberry Pi 3 instead of a laptop. Any ideas, experiences etc. are welcome. 73, Joe OZ0J ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
