Thanks David, I changed settings according to your suggestions and it worked. You made my evening. 73 de Mel/SM0MPV
Den sön 30 juni 2019 kl 21:47 skrev David Kozinn, K2DBK <[email protected]>: > Hi Mel, > > I've got the same radio and am running the same version of Windows. > > My setup is similar to yours, though I've slightly modified the > ON4AOI_500Hz to turn the filter off. I'm also using a baud rate of 19200 > instead of 9600, although as long as the settings in DX4WIN match the radio > it should work fine. > > One other difference is that I've got the poll rate set to 1000ms. I'd try > dropping to that to see if it makes a difference. > > If you want, I can send you the .rig file I'm using (I don't think the > list allows attachments). > > One other thing, had this been working at some point but stopped, or is > this your first try at getting it going? > > 73, > David, K2DBK > > -----Original Message----- > From: [email protected] <[email protected]> On > Behalf Of Mel SM0MPV > Sent: Sunday, June 30, 2019 3:00 PM > To: dx4win <[email protected]> > Subject: [Dx4win] Communication between DX4WIN and IC7600 does not work > > Communication between DX4WIN and my ICOM 7600 does not work. > > If I would like to grab a station from the Band Map the frequency changes > accordingly in the Frequency field but after approximately 5 seconds it > changes back to the previous frequency and nothing happens on the radio. > > However, information from radio to program works nicely. If I turn the VFO > frequency changes in the Frequency field accordingly. The same is true for > band and mode changes. > > Both N1MM and DXlog works nicely both directions. > I need help with suggestions what to do? > -- > 73 de Mel - SM0MPV > 8S0C - Contest Call > > Radio: ICOM 7600 > Computor: IBM Thinkpad, X230, Processor i7-3250 CPU 2.90 GHz Docking > station: ThinkPad UltraBase Serie > Connection: USB-cable > > Silicon Labs CP210X USB to UART Bridge v. 10.1.8.2466 > ‒ Port settings 9600 Bit/s, 8, N, 1, Flow control: None > > Windows 10 v.1903 > > DX4WIN v. 9.0.6.1228 > Rig settings: > ‒ ICOM 7600_250MHz by ON4AOI > ‒ Address 7A > ‒ Baud rate 9600 > ‒ Poll rate 5000 ms > ‒ Max tries 6 > ‒ DTR high and RTS high both enabled > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
