Hello Dennis,
Files > Preferences > Packet1
Type = Regular
COM Port = TCP/IP (unless you're using an external packet modem & 2m)
Baud Rate = 9600
Flow Control = None
Data/Parity = 8 bits/no parity
Packet2
Cluster node auto connect (if you want auto)
Enabled = checked
Node address = choose your favorite, I use VE7CC-1>Whonnock-BC,ve7cc.net
Enter your callsign
Keep alive = 5 (this pings the cluster every 5 minutes, helps keep you
from getting disconnected)
73,
Mike Cizek W0VTT
On 17-Sep-19 15:47, [email protected] wrote:
Some how DX4WIN got corrupted ands wouldn't load. I uninstalled and
reinstalled (version 9), did the update and connected to my log but all my
setup files were gone!
I had saved setup pictures of the various tabs for PREFERENCES and so far
all seems to be working OK...
My question, how do I open the cluster/connect window to start getting spots
and the bandmap?? Its been so long I forgot, LOL....
Regards, Dennis, k0eoo
-----Original Message-----
From: [email protected] <[email protected]> On
Behalf Of Paul van der Eijk
Sent: Thursday, June 27, 2019 12:59 PM
To: David Kozinn, K2DBK <[email protected]>
Cc: DX4WIN Reflector <[email protected]>
Subject: Re: [Dx4win] 9.0.5 Not ignoring dupes during WSJT-x import
I think changing the mode/submode of the old FT4 QSOs will avoid this. When
matching QSOs for import the sub-mode is now looked at too. See Multiple QSO
Operations | Change mode/sub-mode; use this after setting a filter!
--Paul
On Thu, Jun 27, 2019 at 1:12 PM David Kozinn, K2DBK <[email protected]> wrote:
By any chance, were those FT4 QSOs? (That'll only make sense if you're
using the most recent release candidate).
I saw something similar with my first import, but it was fine after that.
-----Original Message-----
From: [email protected] <[email protected]>
On Behalf Of [email protected]
Sent: Thursday, June 27, 2019 10:35 AM
To: [email protected]
Subject: [Dx4win] 9.0.5 Not ignoring dupes during WSJT-x import
Importing QSOs from wsjtx_log.adi into DX4WIN log. Specify to ignore
dupes.
In 9.0.4 this worked nicely, only importing new QSOs.
Now with 9.0.5 it created approximately 140 duplicate QSOs out of
1000+ QSOs in the wsjtx log.
These added Qs differ by a minute.
The import preferences are the same for both versions of DX4WIN 60 & 1800.
Any ideas?
Paul W2LE
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email
list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email
list: http://www.qsl.net/donate.html
--
~~~~~~~~~~~~~~~~~~~~~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
http://www.dx4win.com
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
