Hi Bill, Yes, I often find differences in the grid square. I typically use the grid as reported by the Lotw download, since I assume that the other op chose the correct Station Location when he uploaded to Lotw. There can also be differences in states and zones. I believe some logging programs give you the option to automatically update your log data to correspond to what was reported via Lotw. While every solution has pros and cons, an automatic log sync with Lotw data would be a nice option for those of us who make a lot of contacts. Given that TQSL has recently added more checking of correct Station Locations, it should make the Lotw data even more accurate. Thus, I would use an auto sync function with Lotw if available in DX4WIN. I make too many contacts to go in and look them up manually all the time. The other option is to just ignore the differences.
73, Dave, N4QS -----Original Message----- From: dx4win-boun...@mailman.qth.net <dx4win-boun...@mailman.qth.net> On Behalf Of William Osborne Sent: Thursday, May 7, 2020 12:08 PM To: dx4win@mailman.qth.net Subject: Re: [Dx4win] DX4WIN Digest, Vol 193, Issue 1 Hi Folks, I wonder if the lotwreport.notfound works. Due to potential sync issues, I just downloaded my entire LotW confirmed data base. I then imported it and got a few hundred contacts in the not found file marked with X or C. However, I have now checked about 100 of these and they are all in the log. Also, when I check with DX4Win tool I see no red lined fields from these QSO's. Anyone else have any issues with this feature or am I using it all wrong? Thanks Bill-K5ZQ Thanks, Bill On 5/7/2020 10:15:00 AM, dx4win-requ...@mailman.qth.net <dx4win-requ...@mailman.qth.net> wrote: Send DX4WIN mailing list submissions to dx4win@mailman.qth.net To subscribe or unsubscribe via the World Wide Web, visit http://mailman.qth.net/mailman/listinfo/dx4win or, via email, send a message with subject or body 'help' to dx4win-requ...@mailman.qth.net You can reach the person managing the list at dx4win-ow...@mailman.qth.net When replying, please edit your Subject line so it is more specific than "Re: Contents of DX4WIN digest..." Today's Topics: 1. Re: Cannot start after update (Bob Farkaly) 2. New Satellite (Ricardo Navarrete) 3. DX4WIN.CTY country file Release #20.9 - 03 May 2020 (Jim Reisert AD1C) 4. Re: DX4WIN.CTY country file Release #20.9 - 03 May 2020 (n...@vci.net) 5. Re: DX4WIN.CTY country file Release #20.9 - 03 May 2020 (Paul van der Eijk) ---------------------------------------------------------------------- Message: 1 Date: Thu, 30 Apr 2020 18:10:21 -0400 From: Bob Farkaly To: dx4win@mailman.qth.net Subject: Re: [Dx4win] Cannot start after update Message-ID: Content-Type: text/plain; charset=utf-8; format=flowed I recently had the same problem. Try again but follow the upgrade instructions to the letter. Very finicky. Bob, K9RHY On 4/30/2020 6:03 PM, Jim Reisert AD1C wrote: >> Hi, >> I have been running v9.03 for a while but decided to try an update >> today. After update, DX4WIN won't start at all....The bug report says >> "EAssertion failed", and "Unknown IOTA OC297". Any suggestion?(I am >> pasting the report below.) >> >> 73, TNX >> >> /Mats >> -------------------date/time : 2020-04-30, 19:48:48, 961ms computer >> nhad the sameame : DESKTOP-I44JCRQ user name : sm3lg registered owner >> : admin operating system : Windows NT New x64 build 9200 system >> language : Swedish system up time : 1 hour program up time : 202 >> milliseconds processors : 4x Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz >> physical memory : 5171/8102 MB (free/total) free disk space : (C:) >> 355,84 GB display mode : 1366x768, 32 bit process id : $16dc >> allocated memory : 114,24 MB executable : dx4win.exe exec. date/time >> : 2020-04-30 19:33 version : 9.0.9.1259 compiled with : Delphi 7 >> madExcept version : 3.0n dx4win.exe.mad : $00037cc8, $b2644f86, >> $bd9b08ff callstack crc : $f0bc175a, $64c35f5e, $64c35f5e exception >> number : 1 exception class : EAssertionFailed exception message : >> TIOTASbyPrefix: unknown IOTA=OC297 for prefix=FO >> (C:\dx4win_src\trunk\prefs.pas, line 1890). >> >> main thread ($2da8): >> 006a9c98 +3f0 dx4win.exe segment%381 public%15606 >> 006a6f18 +2f0 dx4win.exe segment%381 public%15546 >> 00671921 +14d dx4win.exe segment%344 public%14685 >> 004d83d9 +031 dx4win.exe segment%72 public%6332 >> 004d8040 +124 dx4win.exe segment%72 public%6327 >> 76ecd374 +034 user32.dll SetWindowTextA 004df8ad +031 dx4win.exe >> segment%72 public%6595 >> 006c23c6 +06e dx4win.exe segment%401 public%16227 >> 772c6357 +017 KERNEL32.DLL BaseThreadInitThunk >> >> thread $33a8: >> 772c6357 +17 KERNEL32.DLL BaseThreadInitThunk >> >> thread $1c24: >> 772c6357 +17 KERNEL32.DLL BaseThreadInitThunk >> >> thread $1588: >> 772c6357 +17 KERNEL32.DLL BaseThreadInitThunk >> >> cpu registers: >> eax = 097fabe0 >> ebx = 00000000 >> ecx = 0019f0a8 >> edx = 006a9c98 >> esi = 00000061 >> edi = 00670b64 >> eip = 006a9c98 >> esp = 0019f07c >> ebp = 0019fc14 >> >> stack dump: >> 0019f07c 98 9c 6a 00 de fa ed 0e - 01 00 00 00 07 00 00 00 ..j............. >> 0019f08c 90 f0 19 00 98 9c 6a 00 - e0 ab 7f 09 00 00 00 00 ......j......... >> 0019f09c 61 00 00 00 64 0b 67 00 - 14 fc 19 00 ac f0 19 00 a...d.g......... >> 0019f0ac 98 9c 6a 00 1c fc 19 00 - c8 50 40 00 14 fc 19 00 ..j......P@..... >> 0019f0bc 64 0b 67 00 10 aa ac 02 - 3c 5c 50 00 00 00 00 00 d.g..... >> 0019f0cc 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f0dc 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f0ec 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f0fc 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f10c 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f11c 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f12c 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f13c 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f14c 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f15c 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f16c 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f17c 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f18c 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f19c 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> 0019f1ac 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ >> >> disassembling: >> [...] >> 006a9c62 lea edx, [ebp-$700] >> 006a9c68 call -$2a41e1 ($405a8c) ; segment%0.public%292 (dx4win.exe) >> 006a9c6d push dword ptr [ebp-$a48] >> 006a9c73 lea eax, [ebp-$a40] >> 006a9c79 mov edx, 4 >> 006a9c7e call -$2a40db ($405ba8) ; segment%0.public%299 (dx4win.exe) >> 006a9c83 mov eax, [ebp-$a40] >> 006a9c89 mov ecx, $762 >> 006a9c8e mov edx, $6a9ec0 ; 'C:\dx4win_src\trunk\prefs.pas' >> 006a9c93 call -$2a4524 ($405774) ; segment%0.public%275 (dx4win.exe) >> 006a9c98 > jmp loc_6a9cb8 >> 006a9c9a inc dword ptr [ebp-8] >> 006a9c9d mov edx, [ebp-8] >> 006a9ca0 shl edx, 2 >> 006a9ca3 lea eax, [ebp-4] >> 006a9ca6 call -$2a718b ($402b20) ; segment%0.public%95 (dx4win.exe) >> 006a9cab mov eax, [ebp-4] 006a9cae mov edx, [ebp-8] >> 006a9cb1 mov ecx, [ebp-$24] >> 006a9cb4 mov [eax+edx*4-4], ecx >> 006a9cb8 lea esi, [ebx+1] >> [...] >> >> >> >> ______________________________________________________________ >> DX4WIN mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dx4win >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:DX4WIN@mailman.qth.net >> >> This list hosted by: http://www.qsl.net Please help support this >> email list: http://www.qsl.net/donate.html > > ------------------------------ Message: 2 Date: Fri, 1 May 2020 13:25:29 +0200 From: Ricardo Navarrete To: DX4WIN Reflector Subject: [Dx4win] New Satellite Message-ID: Content-Type: text/plain; charset="UTF-8" Hello There is a new satellite Active, the RS-44 Uplink in 2 meters Downlink in 70cm. Please could you update the satellite list??? Thanks -- EA4M Ricardo Navarrete ricardoea...@gmail.com *CWops : 1070* *POR FAVOR, SI VAS A REENVIAR ESTE CORREO, TEN EN CUENTA LOS SIGUIENTES PUNTOS:1.- Borra la direcci?n e-mail del remitente as? como cualquier otra direcci?n e-mail que aparezca en el cuerpo del mensaje.2.- Protege frente a terceros a todos los destinatarios de tus mensajes colocando sus direcciones en la l?nea de CCO (Con Copia Oculta).* *Combatir el spam es tarea de todos.* *Gracias por tu colaboraci?n.* ------------------------------ Message: 3 Date: Sun, 03 May 2020 17:06:03 -0600 From: "Jim Reisert AD1C" To: Subject: [Dx4win] DX4WIN.CTY country file Release #20.9 - 03 May 2020 Message-ID: Content-Type: text/plain The DX4WIN country file, DX4WIN.CTY Release #20.9 is now available from: http://www.country-files.com/dx4win-info/ You can read the release notes at: http://www.country-files.com/dx4win-cty-20.9-03-may-2020/ DX4WIN 9 users should use Help | Check for Updates from the main menu. Note that there may be a delay between this announcement and when the updated country file is actually available. Users of older versions of DX4WIN should use the DX4WIN Data Updater: http://dx4win.ad1c.us/updater/ Please inform me of any corrections. 73 - Jim AD1C -- Jim Reisert AD1C, , http://www.ad1c.us ------------------------------ Message: 4 Date: Thu, 7 May 2020 09:39:09 -0500 From: To: "'Jim Reisert AD1C'" , Subject: Re: [Dx4win] DX4WIN.CTY country file Release #20.9 - 03 May 2020 Message-ID: Content-Type: text/plain; charset="us-ascii" It's been four days and I still see no country updates from the Help menu in DX4WIN. Jim, can Ver 9 users still use the updater? I might want to go back to that if possible. Thank you. Dave, N4QS -----Original Message----- From: dx4win-boun...@mailman.qth.net On Behalf Of Jim Reisert AD1C Sent: Sunday, May 3, 2020 6:06 PM To: dx4win@mailman.qth.net Subject: [Dx4win] DX4WIN.CTY country file Release #20.9 - 03 May 2020 The DX4WIN country file, DX4WIN.CTY Release #20.9 is now available from: http://www.country-files.com/dx4win-info/ You can read the release notes at: http://www.country-files.com/dx4win-cty-20.9-03-may-2020/ DX4WIN 9 users should use Help | Check for Updates from the main menu. Note that there may be a delay between this announcement and when the updated country file is actually available. Users of older versions of DX4WIN should use the DX4WIN Data Updater: http://dx4win.ad1c.us/updater/ Please inform me of any corrections. 73 - Jim AD1C -- Jim Reisert AD1C, , http://www.ad1c.us ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ------------------------------ Message: 5 Date: Thu, 7 May 2020 11:13:59 -0400 From: Paul van der Eijk To: "N4QS, Dave Perry" Cc: DX4WIN Reflector Subject: Re: [Dx4win] DX4WIN.CTY country file Release #20.9 - 03 May 2020 Message-ID: Content-Type: text/plain; charset="UTF-8" Sorry, missed the update message. Update is available now, --Paul On Thu, May 7, 2020 at 10:41 AM wrote: > It's been four days and I still see no country updates from the Help > menu in DX4WIN. Jim, can Ver 9 users still use the updater? I might > want to go back to that if possible. > > Thank you. > > Dave, N4QS > > -----Original Message----- > From: dx4win-boun...@mailman.qth.net On Behalf Of Jim Reisert AD1C > Sent: Sunday, May 3, 2020 6:06 PM > To: dx4win@mailman.qth.net > Subject: [Dx4win] DX4WIN.CTY country file Release #20.9 - 03 May 2020 > > The DX4WIN country file, DX4WIN.CTY Release #20.9 is now available from: > > http://www.country-files.com/dx4win-info/ > > You can read the release notes at: > > http://www.country-files.com/dx4win-cty-20.9-03-may-2020/ > > DX4WIN 9 users should use Help | Check for Updates from the main menu. > Note that there may be a delay between this announcement and when the > updated country file is actually available. > > Users of older versions of DX4WIN should use the DX4WIN Data Updater: > > http://dx4win.ad1c.us/updater/ > > Please inform me of any corrections. > > 73 - Jim AD1C > > -- > Jim Reisert AD1C, , http://www.ad1c.us > > > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > -- ~~~~~~~~~~~~~~~~~~~~~ DX4WIN logging software Paul van der Eijk, KK4HD BrookHill Data Systems LLC http://www.dx4win.com ------------------------------ _______________________________________________ DX4WIN mailing list DX4WIN@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win End of DX4WIN Digest, Vol 193, Issue 1 ************************************** ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
