Hi All,
Looking for someone with a Icom IC-705 that is willing to test out a new Rigdriver Via USB connected And following my procedure how to setup. Since I don't have one I can't test. Created yesterday IC9700 - USB (that also will be ok for IC9100) when you are not in SATMODE This due bullshit cmd from Icom (again) for this reason I have the standard IC9700 driver that is used in Radio via CI-V connection. Created today IC7610 - USB and has been tested by Jim AD1C at 3AM (guess he never sleep) and Radi F6GNZ both with succes Your computer Following needs to be checked before you start in Device manager ICOM creates 2 Siliconlabs CP210x comports and they should be left at 115200 baud BUT you need to be sure that you select the standard comportport, This can be checked in the Properties | Details| there go to Property and select Location paths On top line the last number after USB should be (1) ICOM IC705 Menu In Radio | menu | connectors | CIV | USB/LAN REMOTE Tranceive Address make this also A4h (=equal like CI-V address) CI-V USB port should be Unlinked from Remote CI-V USB Baud Rate = 57600 CI-V USB Echo Back = ON In DX4WIN | Prefences | Radio Select now IC 705 - USB Address should become 4A and Baud Rate 57600 Comport is the standard CP210x (see above) Poll Rate is set here 1000 ms and Max tries 2 DTR and RTS are not ON Save changes and exit 115200 is not possible in DX4WIN, But everything above 38400 is waste of traffic if you don't need the waterfall on screen since DX4WIN doesn't have that it doesn't matter Guy ON4AOI - OT7K ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
