Randy: Thanks for the info.
I can set the Utility at 26 WPM, close it and it starts up at 26 WPM again. However, that does not affect DX4WIN. DX4WIN is still starting up the keying window at 60 WPM. Keith W3KB From: Randy Farmer <w...@windstream.net> Sent: Thursday, March 18, 2021 10:12 PM To: Keith Beebe W3KB <ke...@w3kb.net>; DX4WIN Reflector <dx4win@mailman.qth.net> Subject: Re: [Dx4win] Set Startup Speed on new WinKey Mini (WKmini) CW keying interface Not sure about the Mini, but I've used the utility found on the K1EL website to configure a WinKey USB. I would expect you could use it to connect to the WK mini and set the startup (or at least the minimum) speed. 73... Randy, W8FN On 3/18/2021 10:03 PM, Keith Beebe W3KB wrote: Just installed the new WinKey Mini known as the WKmini CW keying interface here on DX4WIN Version 9.0.9.1259. The new WKmini is a straightforward interface with no more speed knob and message buttons, etc. Quite frankly, I like it a lot. The only thing I dislike is that the interface now starts up each time at 60 WPM. I could set the previous WinKey to whatever startup speed I wanted (EX: 26 WPM) by setting the speed knob. This new device does not have that capability and I have to manually set the speed (ALT- F9 down) from 60 WPM each time I start DX4WIN. My Question: Is there any way to configure the speed at DX4WIN startup to a standard (EX: 26 WPM) or whatever with this new WinKey interface? My contest logging program (Writelog) does it, but not DX4WIN. Keith W3KB ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html