Hello Joe, You do not need the frequencies on the card. DXCC Rule 1q states: q) Satellite: Contacts must be made using satellites since March 1, 1965. Confirmations must indicate satellite QSO. Satellite contacts do not count toward any awards noted in a) through p) above.
When filling out the card, use SAT for the band. You may indicate which satellite was used, but it looks like DXCC does not have endorsements for different satellites or frequencies. DXCC rules may be found here: http://www.arrl.org/dxcc-rules ---- 73, Mike Cizek W0VTT -----Original Message----- From: [email protected] <[email protected]> On Behalf Of OZ0J Joe Sent: Saturday, 31 July, 2021 00:20 To: [email protected] Subject: [Dx4win] QO-100 Satellite QSL label? Hi OX3LX has put Greenland on the QO-100 "map" and worked some QO-100 satellite QSOs. I am the QSL MGR and will make the paper QSL cards. According to the information, I have received, I need to type up- and downlink QRG on the QSL card. Is there any way, I can print the up- and downlink QRG on e.g. a QSL label? And if so, in which field in DX4WIN do I put in the information? I can put it in as a group but I am looking for another solution. 73 Joe, OZ0J https://english.oz0j.dk <https://english.oz0j.dk/> ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
