Ok Guy understood. Because I am logging SAT QSO OFF LINE... do you think i get the same result if in the Freq (kHz) I manually write 2400000 ?
Tibor, IK2SAI -----Messaggio originale----- Da: ON4AOI <[email protected]> Inviato: giovedì 28 ottobre 2021 14:39 A: [email protected]; 'ON4AOI' <[email protected]>; [email protected]; 'DX4WIN Refelector' <[email protected]> Oggetto: RE: [Dx4win] QO-100 and Q65 Tibor, That works also since LoTW doesn't check for up and down band but your log on LoTW remains not correct because You will have both Band and Rx band = 3cm and should be 13cm and 3cm Guy ON4AOI -----Original Message----- From: Tibor M. Blum - IK2SAI - <[email protected]> Sent: Thursday, October 28, 2021 2:28 PM To: 'ON4AOI' <[email protected]>; [email protected]; 'DX4WIN Refelector' <[email protected]> Subject: R: [Dx4win] QO-100 and Q65 Hi guys. I am quite active on QO100 since may, this year. Uptoday i made some 230 QSO logging them with my DX4WIN. I must say that I uploaded my log to LOTW and downloaded reports with confirmations. All is ok for me. My experience is different of what has been advised by Guy. I log my QSO100 QSO in this way: Band: SAT Mode: SSB Sub Mode SSB (or the mode performed) Sat name: QO-100 Sat mode:Other. My IC9700 is not cat controlled so Freq (khz) in the input qso window remain blanck. In this way I log my QSO and I receive confirmations via LOTW. I do not manually edit the file that has to be upload to LOTW. Regards, 73 de Tibor, IK2SAI -----Messaggio originale----- Da: [email protected] <[email protected]> Per conto di ON4AOI Inviato: giovedì 28 ottobre 2021 14:13 A: [email protected]; 'DX4WIN Refelector' <[email protected]> Oggetto: Re: [Dx4win] QO-100 and Q65 Hi, Here is how I do it and below also for Q65 qso's Example Log "call:xxxxxx" with Band = SAT ==> this has been always the case for SAT qso's Sat Name = QO-100 Sat Mode = other With cat connected your freq ~ 2400.890 To upload on LoTW or any other logtracker You need to edit first your exportname.ADI Do a search after <BAND:3>3cm and replace it with <BAND:4>13cm Save the *.adi and upload For Q65 qso's I log Mode = MFSK and Submode - JS8 (can be any other submode that you don't need) To upload on LoTW or any other logtracker You need to edit first your exportname.ADI Do a search after SUBMODE:3>JS8 and replace it with SUBMODE:3>Q65 Save the *.adi and upload That's it Guy ON4AOI -OT7K -----Original Message----- From: [email protected] <[email protected]> On Behalf Of RCSEG Sent: Thursday, October 28, 2021 10:05 AM To: DX4WIN Refelector <[email protected]> Subject: [Dx4win] QO-100 Good day How can we log QO-100 QSO,on DX4Win ? I see 13cm for the band, QO-100 for the sat name, but not the correct mode. Any update soon about this please ? 73 F4KMA ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
