I have had a situation in WSJT-X where the reply to my report comes much, much later. If I have cleared the right hand decode window prior to that, and then try to log the contact, it has blanks in the RST field. I try to only clear the right hand window, when all contacts have been confirmed, but if someone comes back with a report four or five minutes later, then it's likely I have cleared out the info. Maybe that is what happened? Mark WA0MHJ
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim Reisert AD1C Sent: Wednesday, December 01, 2021 3:25 PM To: Mike Cizek W0VTT Cc: DX4WIN Reflector Subject: Re: [Dx4win] Beware of an empty RST field in a QSO! > > Looking at my log, all of the VHF Contest mode QSOs with no signal > reports have 599 in the report fields in dx4win. I don't see any > place in the settings for selecting a default RST, so that must be > built in to the program. I think the real question is why are your RST fields blank? > Mike, it was just that one QSO. I don't know what happened. But finding it ultimately saves me from sending a "duplicate" QSL to ARRL for VUCC credit. If I had known earlier, I could have saved postage + SASE costs for obtaining that QSL! -- Jim Reisert AD1C, <[email protected]>, https://www.ad1c.us <http://www.ad1c.us> ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
