> Hi Hi, I have connected my FT-991A by USB cable to my laptop. I use the COM
> 5 Enhanced port from Silicon Labs, Baud Rate 38400 and everything is
> perfect when changing frequency or mode. Can someone help me and tell me
> how I should configure in Setup Parameters / CW to be able to use the macro
> keys on TX? Thank you.
Hola Luc,
I do not think you can do what you want with just one cable. I
believe that you will need a separate COM port (could be a virtual
port with a USB cable) and a CW keying interface connected to the CW
Key input of the FT-991. Something like this (there must be less
expensive options out there):
https://hamcrafters2.com/WKUSBX.html
DX4WIN does not support sending CAT commands to the FT-991A in order to send CW.
--
Jim Reisert AD1C, <[email protected]>, https://www.ad1c.us
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
