Jim, is this problem solved? On Sat, Feb 25, 2023 at 4:47 AM Mike Cizek W0VTT <mgci...@gmail.com> wrote: > > Hello Jim, > > The window is open, but it's hiding somewhere. This comes up regularly and > Kostas has posted instructions on finding lost windows. The one you want is > the Master window, so search for [W-MASTR] > > ---- > 73, > Mike Cizek W0VTT > > > [Dx4win] Lost Windows in version 9 > Kostas SV1DPI Wed, 27 Jun 2018 02:54:24 -0700 > From time to time, I have seen questions about "lost" windows in version 9. > > I found a general solution for this and I post it as a future reference (for > me as well) > > Go to file>preferences and write your configuration file. > Close the dx4win > Go to dx4w903/save directory and rename config.dat to config_old.dat > Edit with notepad (not with word) the file config.txt > At the end of the file there are several sections with the first letter > [W-XXX] and below something like > > Height=192 > Left=300 > Top=300 etc > > Find the window you are interesting, for example packet window is [W-PACK] > Change the value of Left and Top to zero. example > Left=0 > Top=0 > Save the config.txt > Open dx4win > Go to file>preferences and Load configuration file > Choose dx4903/save/config.txt (the file you just saved) > Now the window will open on the left-upper corner. > > Move it where you want and write again your config.txt as a backup for the > future. > Don't forget to open your own log again as dx4win loaded the Samplelog! > If something that you don't like happens, close to dx4win and go to again in > dx4w903/save directory and rename config_old.dat to config.dat > > > -----Original Message----- > From: dx4win-boun...@mailman.qth.net <dx4win-boun...@mailman.qth.net> On > Behalf Of Jim Pyle > Sent: Friday, 24 February, 2023 23:25 > To: DX4WIN Reflector <dx4win@mailman.qth.net> > Subject: [Dx4win] Can't open window with File, Radio and Help commands > > I closed DX4WIN and reloaded the program a while later. For whatever reason > the window containing the "*File, Radio and Help*" > commands did not open. I could not find the correct link to get it to open. > I'm hoping someone can advise the correct keystrokes to get it open. > > Thanks, Jim, AA8OY > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html
-- Jim Reisert AD1C, <jjreis...@alum.mit.edu>, https://ad1c.us ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html