Hi all! And thanks for the suggestions. The problem, Dave, is not really to eliminate the error message, but to make things simpler and more automatic. Because these manual actions come to be as if when the error appears, click OK, and if you later want to turn the radio back on, press the "Start Radio" button. And as far as I know about programming, being able to make it so that if an error appears (either due to time out or simply due to an error when opening the COM port) it is captured in a process and a task tries to reconnect it every X seconds, it shouldn't be that complicated. .
Something similar that could also be done to telnet (connection to the cluster), an automatic reconnection option. 73s Pablo EA4TX -----Mensaje original----- De: [email protected] <[email protected]> En nombre de David Perry, N4QS Enviado el: miércoles, 1 de marzo de 2023 20:08 Para: [email protected] Asunto: [Dx4win] FW: Radio Time out -> Autoreconnect Pablo, Another way would be to click on Radio and then Stop Radio. You can then turn off the radio and DX4WIN will not give the error messages. When you later turn the radio back on, be sure to click on Radio, Start Radio, and you will be all set. 73, Dave, N4QS -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Mike Cizek W0VTT Sent: Wednesday, March 1, 2023 11:38 AM To: [email protected]; 'DX4WIN Reflector' <[email protected]> Subject: Re: [Dx4win] Radio Time out -> Autoreconnect Hello Pablo, The easiest way is to not leave the program in Add Real Time (F9) mode. Simply hit <Page Down> after entering a QSO or string of QSOs. Yes, auto-reconnect would be nice, but it would probably require major programming. ---- 73, Mike Cizek W0VTT -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Pablo via DX4WIN Sent: Wednesday, 1 March, 2023 11:29 To: 'DX4WIN Reflector' <[email protected]> Subject: [Dx4win] Radio Time out -> Autoreconnect Is it possible to configure DX4WIN so that if the radio is turned off, it does not display the uncomfortable error message? Radio time out Radio interface has been disabled And that as a background task it automatically reconnects when the CAT port is responding again without having to press the button: Start Radio I don't know if it only happens to me, but it's very annoying and I think there would be an easy solution in Code in case it couldn't be configured. Any idea? Rgrds, Pablo EA4TX ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
