Hi Juha, Yes there is a way but not 100% bullet proof and only for FT8 not FT4 since this is Mode MFSK Submode FT4 I suggest you start with write configuration file in Setup Parameters Copy that file on a usb stick or safe place.
Now in Setup Parameters Under "QSO" change all bands CW CUTTOFF frequency so that the FT8 freq is not part of CW The reason why I wrote not bullet proof is that some expeditions use another freq than the normal FT8 freq and can be in the CW PART Under Packet 3 tab select the bands you need and in Modes only FT8 Safe this and normally only FT8 spots will get into DX SPOTS WINDOW Guy ON4AOI - OT7K -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Juha Rantanen Sent: Tuesday, December 12, 2023 2:24 PM To: [email protected] Subject: [Dx4win] Filtering digi spots Hi, Is there a way in DX4WIN to filter out digi (FT8) band mode points away? I sold my soul recently to K1JT and FT8 and now that I have activated DIG to DXCC and FT8 spots I am seeing FT8 spots being a new mode point for each DXCC. I am not going to start working every country again on FT8 just to sort out the DX Spots window. I would like to see new countries and band points only on FT8. 73, Juha OH6XX ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
