I was going to say similar. You should not be uploading your COMPLETE WSJT ADI each time (if containing all your old uploaded QSOs too). Duplicates may not normally cause an upload problem/error, but uses LOTW server time to scan the duplicates, which would now be quite large after years of FT8. Having hundreds do that is not insignificant time consumption despite the good speed of LOTW server processing. There are limitations in place right now to prevent duplicate logs being uploaded so the server may have stopped after certain many duplicates since 99+% were duplicates before the new ones would start processing.
I also exported from DX4WIN to cover ALL QSOs (phone, CW, etc.), not just WSJT modes, at the same time with one upload (when I was using DX4WIN). I dated the filenames so I knew where to begin the next download. Dan KI6X -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Rich Sent: Sunday, July 7, 2024 4:44 PM To: [email protected] Subject: Re: [Dx4win] DX4WIN Yields LOTW SUCCESS ! I believe that the ARRL stated if you upload a log with a massive amount of QSOs that were already loaded. Those files would be ignored or put in a holding pattern. All due to the massive amount of uploads as it comes back on line. By selecting the date range your file became "acceptable" if you will. Rich On 7/7/2024 19:22 PM, [email protected] wrote: > Glad to hear that it's working now, but when you said "without success", what > exactly happened? Did you get some kind of error message? How were you > uploading to LoTW? > > For what it's worth, I always use the LOTW export out of DX4WIN after > importing from WSJT-X or anything else (e.g., N1MM). I would think if there > was an actual issue with the WSJT-X ADIF itself the development team would > have been aware and fixed it. Also since it seems to have imported into > DX4WIN it shouldn't have been corrupted. > > -----Original Message----- > From: [email protected] <[email protected]> > On Behalf Of Dave K > Sent: Sunday, July 7, 2024 7:15 PM > To: [email protected] > Subject: [Dx4win] DX4WIN Yields LOTW SUCCESS ! > > HI All, > > All week I have been trying to upload my WSJT ADI file into LOTW w/o success. > Yet everyone says LOTW works. > > SO, I took my DX4WIN log and exported it with the dates I wanted, and LOTW > took it right away correctly. DX4WIN saves the day ! > > I then downloaded the LOTW ADI Confirmations file into DX4WIN and got latest > Confirmations. Everything is GOOD ! > > Some how the WSJT file got corrupted I guess. > > 73 Dave W4JVN > > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
